Clarion CZ505

CDIMP3/WMA Operations
Top function
The top function resets the
CD player
to the
first track of the disc. Press (
4 )
button to
play
the first track (track No.
1)
on the disc.
*
In
case of MP3/WMA, the first track of the
current
folder will
be
played.
Other various
play
functions
Scan play
This function
allows
you
to
locate
and
play
the first
1
0
seconds of
all
the tracks recorded
on a disc.
Press the [
1 )
button to perform scan play.
Repeat
play
This function
allows
you to play
the current
track
repeatedly
or
play
a
track
currently
being
played
in
the
MP3/WMA
folder
repeatedly.
CD:
1.
Press the [
2 )
button once
or
more
until
"RPT
ON"
appears on the LCD to perform
repeat
play.
USB Operations
1.
Open
the
cover
of
the
USB
connector
to the right.
Insert
a
USB cable (optional
CCA-755) into the
USB
connector.
Insert
a
USB
device into the
USB
cable.
When connecting a
USB
device, the unit
will
read the
files
automatically.
2.
To
remove the
USB
device, you
should
first
select
another
source
or
turn
off
the
power,
in
order
to
avoid
damaging
the
USB
device.
Then
remove
the
USB
device. Close
the cover.
3.
Operation
is
the
same
as
MP3/WMA
operation.
2.
Press [
2 ]
button again to
cancel repeat
playback,
"RPT OFF"
appears
on
the
LCD.
MP3/WMA:
1.
Press the [
2 ]
button once or more
until
"TRACK RPT"
appears on the
display
to
perform repeat
play,
and
"RPT"
segment
lights
on.
2.
For
MP3/WMA
files,
press
[
2 )
button
repeatedly until
"FOLD
RPT'
appears on
the
display
for
folder
repeat
play.
3.
Press [
2 ]
button repeatedly until
"RPT
OFF"
appears on the
display
to
cancel
re-
peat
playback, and
"RPT"
segment goes
off.
Random
play
This function
allows
you to
play all
tracks
recorded on a disc
in
a random order.
Press the [
3 ]
button
to
perform random
play.
iPod
&
iPhone Operations
Connect
Connect
an
iPod
or
iPhone
to
the
USB
connector
via
accessory
cable
for
iPod/
iPhone.
When connecting a device, the unit will
read
the
files
automatically. The track information
displays on the screen once
playback start.
MENU
In
the
S-CTRL
OFF
mode, press [
MENU
]
button,
then
press
the
[VOLUME]
knob
after appear the
"
MUSIC
",
then rotate the
[VOLUME]
knob
to
select
PLAYLISTS
I
ARTISTS
I
ALBUMS
I
SONGS
I
GENRES
I
COMPOSERS,
and press the
[VOLUME]
knob to confirm.
Play/Pause
Press the [
.,.
..
] button on the
panel
or
on the
remote
control
for
play/pause.
Repeat
play
This function
allows
you to play
the current
track
repeatedly
or
play
all
tracks
in
your
iPod/iPhone
repeatedly.
1.
Press the [
2 ]
button once
or
more
until
"RPT
ON"
appears on the LCD to perform
repeat
play.
2.
Press [
2 ]
button
repeatedly until
"RPT
OFF'
appears on the LCD to
cancel
repeat
playback.
Random
play
This
function
allows
you to
play
all
tracks
recorded on your iPod/iPhone in a random
order.
1.
Press [ 3 ] button
repeatedly until
"ROM
ALBUM"
appears on the LCD for
album
random
play.
2.
Press the [ 3 ] button once or more
until
"ROM
SONG"
appears
on
the
LCD
to
perform random
play.
3.
Press [
3 ]
button
repeatedly until
"ROM
OFF"
appears
on
the
LCD
to
cancel
random
playback.
Setting iPod simple control mode
Use
this
function
if
you
wish
to
operate
through your iPod connected to this unit via
the
USB
cable.
*The
factory
default setting
is"
OFF".
1.
Press and hold [
DISP
]
button to
enter
system setup.
2.
Press [
1+111]
or
(~]button
to select
"S-CTRL".
3.
Rotate the
[VOLUME]
knob to
select
" ON "
or
"
OFF " .
When using iPhone 5s with iOS
8.1
and
S-CTRL OFF,
operations can
still
be made
through the
iPod.
Notes:
•
When performing iPod operations using
simple control
mode, make the operations
slowly.
If
repetitive
operations
are
performed too
quickly, unforeseen errors
may occur.
•
When performing iPod operations using
simple
control
mode,
please
do
not
operate the iPod and the unit at the same
time, otherwise there may be unexpected
event happened.
•
Some
iPod
models
do
not
support
this
function.
Consult
your
nearest
Clarion
dealer
or website to confirm which
models
do not support this function.
iPod menu alphabet search
This
function
searches
the
subfolders
for
desired
alphabetical letters.
1.
Press the
[MENU]
button to
select the iPod
menu mode.
CZ505
13