About HD Radio™ Technology
H
D Radio Technology allows CD-quality
digital broadcasting of your local AM and
FM radio stations. HD Radio broadcasts
can include multiple channels on the same
frequency, which is called multicasting. With
multicasting, you can receive up to eight
additional multicast channels: HD1~HD8.
With an HD Radio tuner connected, you
will receive HD Radio digital broadcasts
automatically when tuned to a station that
offers HD Radio Technology.
NOTE: Not all FM or AM stations offer
HD Radio (digital) broadcasting. You can
receive both analog and digital stations
with the unit.
Accessing radio mode
P
ress the [SRC /
] button on the front
panel or remote control to switch to the HD
RADIO source, and HD icon will illuminate.
Select a band
P
ress the [BAND /
]
button to change
between three FM and one AM bands. Each
band stores up to six preset stations.
Tuning
- Seek Tuning
P
ress and hold the [
]
or [
]
button to
seek the next/previous station automatically.
- Manual Tuning
Press the [
]
or [
]
button to move the
radio frequency number up or down one
step.
HD Radio multicast channels
T
o tune to an HD Radio multicast channel,
tune to the main signal and then press the
[MENU /
]
button on the panel. PTY and
SUB CH are displayed. Select PTY or SUB
CH by rotate [VOLUME] knob and push to
conrm.
•
Select PTY
type from the category list by
rotate [VOLUME] knob and push.
•
Select SUB
CH by rotate [VOLUME] knob
and push.
HD Radio Operations
• Mu
lti channel is available when a digital
signal is detected, the DIGITAL icon will
illuminate. If the digital signal becomes
unavailable, the unit will revert to Analog
reception.
Preset stations
U
p to six stations on each band can be
stored as presets, which can then be instantly
recalled by pressing the associated preset
button. To store a station, turn the radio on
and select the desired band and station. Press
and hold the desired preset button (numbered
one through six on the face of the radio or
remote control) for more than 1 second. When
stored, the preset number will appear in the
display. The station is now stored and can be
recalled by pressing the corresponding preset
button. Repeat for the remaining ve presets
on the current band and for presets on the
other four bands.
NOTE: Multicast stations can be stored as
presets, but the unit must be in Digital or
Auto reception mode to receive them.
Preset scan
Press
the [PS/AS] button to scan and play all
preset stations for 10 seconds each. Press
[PS/AS] again to stop scanning and play the
current station.
Note:
Be careful not to press and hold the [PS/AS]
button for 1 second or longer, otherwise the
auto store function is engaged and the unit
starts storing stations.
Automatic store (AS)
Press and hold the [PS/AS] button (1 sec.) to
select six strong stations and store them in the
FM3 or AM band using the Auto Store feature.
After entering the stations into memory, the
unit will automatically stop at each station for
five seconds, allowing you to preview each
selection. When using the Auto Store feature,
the new stations replace any stations already
stored in preset memory.
Note:
You can stop the Auto Store function at any
time by pressing the [PS/AS] button again.
Select tuner as playing source
Press [SRC / ] button once or more to enter
RADIO mode.
Selecting the radio band
Press the [BAND / ] button on the panel or
on the remote control to select one radio band
among FM1, FM2, FM3, AM.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Press the [ ] or [ ] button on the panel
to tune in a higher / lower station.
Press the [ ] or [ ] button on the remote
control to select preset stations.
Auto tuning
Press and hold the [ ] or [ ] button to
seek a higher / lower station.
To stop searching, repeat the operation above
or press other buttons having radio functions.
Note:
When a station is received, searching stops
and the station is played.
Preset scan
P
reset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station in
memory.
1.
Press the [PS/AS] button.
2.
Wh
en a desired station is tuned in, press
the [PS/AS] button again to continue
receiving that station.
Note:
B
e careful not to press and hold the [PS/
AS] button for 1 second or longer, otherwise
the auto store function will begin and the unit
starts storing stations.
Auto store
Only stations with sufcient signal strength will
be detected and stored in the memory.
Press and hold the [PS/AS] button (1 sec.) to
start automatic station search.
Radio Operations
To stop auto store, press other buttons
having radio functions.
Notes:
1. After auto store, the previous stored
stations will be overwritten.
2. The unit has 4 bands, such as FM1, FM2,
FM3 and AM. FM3 and AM can store
by AS function. Each band can store 6
stations, CZ702 can store 24 stations
in total.
Manual store
When one expected radio station has been
detected, press and hold number button 1-6
to store it in the memory.
Recall the stored stations
Press one numeric button among 1 to 6 on
the panel to select the corresponding stored
station.
Local seeking
When LOCAL seeking is ON, only those
radio stations with strong radio signal could
be received.
To select LOCAL function, press and hold
the [ DISP ] button on the front panel, then
press [ ] button repeatedly until LO or
DX displays on the screen, and rotate the
[VOLUME] knob to select Local or Distant
mode.
Note:
T
he number of radio stations that can be
received will decrease after the local seeking
mode is ON.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
