Clarion DXZ945MP - Page 16

'1i.OFFF .....
POSITION Dolby PLll RTN
------SOUND MENU--
2 • ZONE ADF A • MODE
"WOFFW" "?iOFF~'"
3. Touch -t I:J 1" on the adjustment item display
to select
"BASS" or "TREBLE".
Adjusting bass/treble
The bass/treble mode can be adjusted only
when the Dolby Pro Logic
II mode is set to
"OFF" (cf. page 17) and "Ea SELECT" is set to
"BASrrREB" (cf. page 39).
•
The factory default setting is "0".
1. Press the [SOUND] button.
2. Touch A-MODE.
4. Touch
-t I:J 1" on the right of the display and
adjust the item as desired.
* This item can be adjusted within the range
-6 to +6.
5. Repeat steps 3 and 4
to adjust the desired
item.
6. Press the [SOUND] button to return to the
original mode.
4. Touch -t I:J 1" on the right of the display and
adjust the item
as desired.
* This item can be adjusted within the range
-5 to +5.
5. Press the [SOUND] button to return to the
original mode.
'~OFFii' ~
POSITION P. EQ Dolby PLll RTN
------SOUNDMENU------
2 • ZONE ADF A • MODE
"'f OFFf0 OFFf
Basic Operations
Adjusting balance/fader
BALANCE:
Adjusts the volume balance between the left
and right speakers.
FADER:
Adjust the volume balance between the front
and rear speakers.
•
The factory default setting for BALANCE is "0"
and for FADER is "0".
Note:
• Balance/fader cannot be adjusted when "PRO" is
selected
at AC-PRO III (cf. page 39) and the
position function is
set to lION". Adjust balance/
fader by the "Selecting the position menu" (cf.
page 17).
1. Press the [SOUND] button.
2. Touch A-MODE.
3. Touch
-t I:J 1" on the adjustment item display
to select "BALANCE" or "FADER".
4. Touch
-t I:J 1" on the right of the display
adjust the item
as desired.
* "BALANCE" can be adjusted within the
range L
13 (left side emphasized) and R 13
(right side emphasized).
* "FADER" can be adjusted within the range
R12 (rear side emphasized) and F12 (front
side emphasized).
5. Press the [SOUND] button to return
to the
original mode.
16 DXZ945MP