AC-ProcessorIII Operations
CAR
LENGTH:
Adjusts the deviation in sound pressure along
the length of the car.
1. Press the [SOUND] button.
2. Touch VSE.
3. Touch
~
If:,
l'
on the
ON/OFF
display.
The
VSE effect is toggled ON/OFF.
4. Touch B/U to select "BASIC"
or
"USER".
5. Touch
~
If:,
l'
on the right of the display
to
select the menu that is used as the menu
for
adjustment.
6.
Press the [A] button.
7. Touch
~
If:,
l'
on the adjustment item display
to select "DIFFUSE",
"CAR
WIDTH"
or
"CAR
LENGTH".
8. Touch
~
If:,
l'
on the right of the display and
adjust the item as desired.
* This item can be adjusted within the range
1 to 10.
9.
Repeat steps 7 and 8 to adjust the desired
item.
10. When you have finished adjusting each item,
touch RTN.
The
display returns
to
the original screen,
and
"»"
is displayed at the BASIC
or
USER
display.
Operation so far completes VSE adjustment.
To
continue to store the adjustment values to
the VSE user menu, perform the following.
11. Touch and hold RTN for 1 second
or
longer.
The VSE user menu list is displayed.
12. Touch and hold the
user
memory
you
want
to
store the adjustment values to for 2
seconds
or
longer.
You
will hear a long beep, and the values
you adjusted up
to
step 9 are stored to
the
VSE
user menu.
If you hear a short beep, the adjustment
values up to step 9 are discarded. Adjust
these values again
as
required.
13. Touch RTN.
14. Press the [SOUND] button to return to the
original mode.
*
To
select a stored user memory, touch B/U
to display "USER" and touch
~
If:,
l'
on
the
user memory No.
20
DXZ945MP
Selecting the
P.EQ
menu
PEQ (Parametric Equalizer) allows you to
compensate the entire frequency level range in
detail by smooth curve using frequency
compensation matched to the type of your car.
In
the "Selecting each mode" procedure (cf.
page 39), set EQ
SELECT
to "P.EQ".
• The factory default setting for P.EQ is "OFF"
and for the
P.
EQ
basic menu is "SEDAN-1".
•
P.EQ
basic menu
6 types of
PEQ
basic menu are pre-stored to
this function matched
to
the type
of
your
car
and
the speaker mounting position. Select the basic
menu to suit you car.
1.
Press the [SOUND] button.
2. Touch P.EQ.
,,;OFFf
"'OFF'""'....,
POSITION
P.
EQ
Dolby
PLll
RTN
------SOUNDMENU------
2 •
ZONE
ADF
A •
MODE
°TIOFFfO
O'~OFFF
3.
Touch
~
If:,
l'
on the
ON/OFF
display.
The P EQ effect is toggled ON/OFF.
When the P.EQ effect is set to "OFF", the
PEQ setting is not reflected on the music
source. This ends the P.EQ setting. Press
the [SOUND] button to return to the original
mode.
4.
Touch B/U to select "BASIC".
Each touch of B/U toggles between "BASIC"
and "USER".
5.
Touch
~1f:,1'
on the P.EQ basic menu No. to
select the P.EQ basic menu.
To Next Page
Loading...
