Radio Operations
I
Tuning
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Seek
tuning
Seek tuning
is
a function for automatically
tuning stations with good reception.
1.
Touch and hold BAND for 1 second or longer
while MANU
is
displayed.
Automatic tuning
is
possible when MANU
disappears.
2.
Touch -t
1f,J-
on the frequency display.
SEEK UP/SEEK DOWN
is
displayed, and
tuning starts.
Tuning automatically stops at stations with
good reception.
•
To
cancel tuning
1.
Touch
+If,-+
on
the frequency display again.
Manual tuning
There are 2 ways available: quick tuning and
step tuning.
In
the step tuning mode, the frequency changes
1 step at a time.
In
the quick tuning mode, you
can quickly tune the desired frequency.
1.
Touch and hold BAN D for 1 second or longer
while MANU
is
not displayed.
Manual tuning
is
possible when MANU
is
displayed.
2.
Operate the frequency display to tune to a
frequency on which there is a broadcast.
• Step tuning
Touch
-tIf,
i'
on
the freq uency display.
• Quick tuning
Touch
+If,+ on the frequency display. Tuning
stops when you take your finger away from the
panel.
24
DXZ945MP
Recalling a preset station
Recalling a preset station
is
a function for tuning
pre-stored stations.
1.
Touch and hold MODE for 1 second or
longer.
The preset memory list
is
displayed.
2.
Touch the station you want
to
listen
to.
*
In
the normal mode, preset No. can also
be
tuned
by
touching
-t~J-
in
the main
display.
•
To
cancel tuning
1.
Touch RTN.
Preset memory
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations
in
memory.
1.
Touch BAND to switch the reception band.
2.
Operate the frequency display to store the
station
to.
3.
Touch and hold MODE for 1 second or
longer.
The preset memory list is displayed.
4.
Touch and hold the preset
No.
to store the
station to for 2 seconds or longer.
You
will hear a long beep, and the station is
stored
in
memory.
Auto store
Auto store
is
a function for storing up to 6
stations that are automatically tuned
in
sequentially.
1.
Touch MODE.
2.
Touch and hold A-STORE for 2 seconds
or
longer.
The MODE display changes to "A-STORE"
and the preset
No.
in the auto-store
operation appears
on
the preset
No.
display.
* Stations with good reception are
automatically searched, and are stored to
preset memory (No.1 to No.6)
in
order
from the station having the lowest
frequency.
To Next Page
Loading...
