Radio Operations
Notes:
• When auto store
is
performed, stations stored to
memory
so far are cleared.
• When there are fewer than
6 stations with good
reception,
low
frequencies are automatically
returned
to,
and
auto store
is
perlormed again.
If
there are fewer than 6 stations even
after
auto
store
is perlormed twice, stations stored so far
remain in memory.
Preset
scan
Preset scan is a function for receiving stations
in
the order that they are currently stored to preset
No. so that broadcasts can be checked.
1.
Touch MODE.
2.
Touch P-SCAN.
The MODE display changes to
"P~SCAN"
and the preset No.
in
the preset scan
operation is displayed
in
the preset No.
display.
* The currently stored stations are received
in
order for 7 seconds or longer each.
Stations with poor reception are skipped,
and the next station is received.
When preset scan
is
performed
in
an
FM
broadcast,
FM
stations are received as
follows:
FM1
(1
... 6) FM2
(1
...
6) ... FM3
(1
...
6)
...
FM1
{1
6)
...
When preset scan is performed
in
an AM
broadcast, AM stations are received as
follows:
AM
(1
...
6)
...
AM
(1
...
6) and so forth.
•
To
cancel
preset
scan
1.
Touch P-SCAN.
The P-SCAN display changes to "MODE",
and the stations that were being received
when P-SCAN was touched are received
next.
Instant station recall (ISR)
Instant station recall
is
a special radio preset
that instantly accesses a favorite radio station at
a touch of a button. The ISR function even
operates with the unit
in
other modes.
• The ISR function cannot be used when the 2-
ZONE function is
in
use.
• The factory default setting is "FMB7.9MHz".
1.
Press the [I] button.
"ISR" appears
on
the display.
•
To
return
to
the
previous
mode
Either press the [I] button again, or press the
[ROTARY] knob.
• To
store
the
station
to
"ISR"
In
the radio mode, tune the station to store, and
touch and hold the [I] button for 2 seconds or
longer.
You
will hear a long beep, and the station
currently being received
is
stored to ISR.
I
DXZ945MP
25
To Next Page
Loading...
