2.
Touch "t1:J,.
on
the setting item display to
select the desired adjustment item under
"PL
II
CONT".
The adjustment items are "PANORAMA",
"DIMENSION" and "CTR WIDTH".
3.
Either touch "tI:J,.
on
the right of the
display, or turn the [ROTARY] knob and
adjust the item as desired.
* Select "YES" or "NO" for "PANORAMA".
* "DIMENSION" can be adjusted within the
range 0 to
6.
* "CTR WIDTH" can be adjusted within the
range 0 to
7.
4.
Press the [A] button to return to the original
mode.
Displaying
the
Sirius
ID No.
(SID DISP)
• This item can be set only when Sirius is
connected.
1.
Press the [A] button to set to the adjust
mode.
2.
Touch "t1:J,. on the setting item display to
select "SID DISP" under "TUNER".
3.
Either touch "tI:J,.
on
the right of the
display, or turn the [ROTARY] knob to switch
between the display for the upper 6 digits
and the lower 6 digits.
4.
Press the [A] button to return to the original
mode.
AUX
function
This system has an external RCA input so you
can listen to sounds and music from external
devices connected to this unit.
Operations Common to Each Mode
Setting the
input
level
(AUX
SENS)
of
portable
audio
(AUX
mode)
This function allows you to set the input level of
optional external devices connected to this unit.
• The factory default setting is "MID".
1.
Press the [A] button to set to the adjust
mode.
2.
Touch "t I:J,.
on
the setting item display to
select "AUX SENS" under "SETTING".
3.
Either touch "tI:J,. on the right of the
display, or turn the [ROTARY] knob to set
the input level.
* Select one of
LOW,
MID or HIGH.
4.
Press the [A] button to return to the original
mode.
Performing
a
system
check
This function allows you to perform a system
check from the adjust mode when required.
1.
Press the [A] button to set to the adjust
mode.
2.
Touch "t1:J,.
on
the setting item display to
select "SYSTEM CHECK" under
"SETTING".
ADJUST
AlODE
SYSTEM
CHECK»
START
3.
Touch and hold START for 1 second or
longer.
"System Check" appears
on
the display.
4.
Press the [ROTARY] knob.
The system check starts.
When the system check
is
complete,
"Completed" appears on the display.
5.
Press the [ROTARY] knob again.
The main display for the radio mode
appears.
DXZ945MP
43
To Next Page
Loading...
