Operations Common to Each Mode
CTR
GAIN
(center speaker)
*1
•
FRONT(iJGAIN
~
(front right speaker)
•
SROIDGAIN
(rear right speaker)
3.
Either touch
--t
I:,
~
on the right of the
display, or turn the [ROTARY] knob to adjust
the delay time.
* "SRD-SP" can be adjusted within the
range 0 ms to 15 ms.
4.
Press the [A] button to return to the original
mode.
Adjustment
items
PANORAMA
(panorama
control
setting)
This widens the soundfield image at the front up
to the rear speakers. Set this item to "YES" if
you feel that there is no surround effect.
DIMENSION
(dimension
setting)
Shifts the soundfield image to the front or the
rear. When the soundfield image inclines to
either the front or the rear, this inclination can
be
compensated.
Adjustment value 3 is the center position.
Adjustment values 2 to 0 shift the soundfield
image to the rear, while adjustment values 4 to
6 shift the soundfield image to the front.
CTR WIDTH
(center
width
setting)*1
Adjusts the fixed position of the center channel
between the center speaker and
UR
front
speakers.
When the center sound is divided equally to the
left and right, the entire soundfield image
increases to produce a naturally expanding
feeling.
Adjustment value 0 plays back all center sounds
on the center speaker.
Adjustment value 7 divides the center sound
equally between the
UR
front speakers.
*1 "CTR WIDTH" is displayed only when "SP-
SETTING" is set to "CTR+SW" and
"CENTER-SP" is set to "ON".
1.
Press the [A] button to set to the adjust
mode.
Setting the
music
mode
in
detail (PL II CONT)
This function allows you to set the music mode
in
more detail when the Dolby Pro Logic
II
mode
is set to "MUSIC".
• This item can be set only when the Dolby Pro
Logic
II
mode is set to "MUSIC".
• The factory default setting for PANORAMA is
"NO", for DIMENSION is "3" and for
eTR
WIDTH is "3".
4.
Touch
--t
I:,
~
on the adjustment item display
to select the desired item.
Each touch of
--t
I:,
~
switches the
adjustment item as follows:
Adjustment
items
FRONT[lGAIN
(front left speaker)
----.
t
SUB-WGAIN
(sub-woofer)
*2
t
SRO[lGAIN
(rear left speaker)
......-
Adjusting
the delay time
of
the
rear
speaker
(PL II
DELAY)
The timing that sound arrives at the listening
position differs according to the mounting
position of the rear speakers and the size of
your car. If you adjust the delay time of the rear
speakers, you can adjust so that sound from the
rear speakers can be heard at the same timing
as output from the front speakers.
• This item can be set only when the Dolby Pro
Logic
II
mode is set to "MUSIC" or "MATRIX".
• The factory default setting is
"Oms".
1.
Press the [A] button to set to the adjust
mode.
2.
Touch
--t
I:,
~
on the setting item display to
select "SRD-SP" under "PL
II
DELAY".
*1 "CTR GAIN" is displayed only when "SP-
SETTING" is set to "CTR+SW" and
"CENTER-SP" is set to "ON".
*2
"SUB-W GAIN" is displayed only when
"SUB-WOOFER" is set to "ON".
5.
Either touch
--t
I:,
~
on the right of the
display, or turn the [ROTARY] knob to adjust
the output level.
The output level can be adjusted within the
range -10 dB to +10 dB
6.
Repeat steps 4 and 5 to adjust each item.
7.
Press the [A] button to return to the original
mode.
42
DXZ945MP
To Next Page
Loading...
