MODE
Touching this displays sub-functions. Touching
and holding this for 1 second or longer displays
the preset memory list.
P-SCAN: This is displayed during a preset
scan. Touching this ends the preset scan.
A-STORE: This is displayed during an auto-
store. Touching this ends the auto-store.
BAND
Touching this switches the reception band.
Touching and holding this for 1 second or longer
toggles between the manual tuning mode and
the seek tuning mode.
<~
~>
(only
in
the
simple
operation
display)
Touching these buttons enables seek tuning or
step tuning (in the manual tuning mode).
Touch and holding these buttons enables quick
tuning (in manual tuning mode).
• Preset memory
list
display
This is displayed by touching and holding
MODE for 1 second or longer
in
the main
display.
Station name
..,
RTH
» :
Tuning
in
progress
RTN:
Touching this returns the display to the main
display.
Selecting the TV
mode
1.
Press the [ROTARY] knob to select the TV
mode.
Each press of the [ROTARY] knob switches
the mode as follows:
* The mode of equipment that is not
connected is not displayed.
TV Operations
SWitching the reception
band
1.
Touch BAND to switch the reception band.
Each touch of BAND switches the reception
band.
TV1
..
TV2
..
TV1
...
Seek
tuning
Seek tuning
is
a function for automatically
tuning stations with good reception.
1.
Touch and hold BAND for 1 second or longer
while MANU is displayed.
Automatic tuning is possible when MANU
disappears.
2.
Touch
+i)+
on the channel display.
SEEK UP/SEEK DOWN is displayed, and
tuning starts. Tuning automatically stops at
stations with good reception.
•
To
cancel
tuning
1.
Touch
+i)+
on the channel display again.
Manual
tuning
There are 2 ways available: quick tuning and
step tuning.
When you are
in
the step tuning mode, the
frequency changes 1 step at a time.
In
the quick
tuning mode, you can quickly tune the desired
frequency.
1.
Touch and hold BAND for 1 second or longer
while MANU is not displayed.
Manual tuning is possible when MANU is
displayed.
2.
Operate the channel display to tune to a
channel
on
which there is a broadcast.
There are 2 manual tuning methods: step
tuning and quick tuning.
* Step tuning is a function for switching the
channel 1 step at a time.
Touch
"t
i)
~
on
the frequency display.
* Quick tuning is a function for switching the
channel continuously.
Touch
+i)+
at the channel display.
Tuning stops when you take your finger
away from the panel.
DXZ945MP
49
To Next Page
Loading...
