TV Operations
2.
Touch and hold A-STORE for 2 seconds or
longer.
The MODE display changes to "A-STORE"
and the preset No.
in
the auto-store
operation appears
on
the preset
No.
display.
* Stations with good reception are
automatically searched, and are stored to
preset memory (No.1 to No.6)
in
order
from the station having the lowest
frequency.
Notes:
• When auto store is performed, stations stored
to
memory so far are cleared.
• When there are fewer than
6 stations with good
reception, low frequencies are automatically
returned
to,
and
auto store is performed
agah
If
there are fewer than 6 stations even afterauto
store
is
performed twice, stations stored so far
remain
in
memory.
Preset
scan
Preset scan
is
a function for receiving stations in
the order that they are currently stored to preset
Nos.
so
that broadcasts can be checked.
1.
Touch MODE.
2.
Touch P-SCAN.
The MODE display changes to "P-SCAN"
and the preset No. in the preset scan
operation is displayed in the preset
No.
display.
* The currently stored stations are received
in order for
7 seconds or longer each.
Stations with poor reception are skipped,
and the next station
is
received.
TV stations are received
as
follows:
TV1
(1
... 6)
...
TV2
(1
... 6)
...
and
so
forth.
•
To
cancel the preset scan
1.
Touch P-SCAN.
The P-SCAN display changes to "MODE",
and the stations that were being received
when P-SCAN was touched are received
next.
Auto
store
Auto store selects 6 TV stations automatically
and stores each one into preset memory.
If there are not 6 stations with good reception,
stations previously stored in memory remain
and only the strong stations are stored into
memory.
1.
Touch MODE.
Touch and hold MODE for 1 second or
longer.
The preset memory list
is
displayed.
2.
Touch the station you want to listen
to.
* The station can also be tuned by touching
-t
I.W!J
l'
at a preset
No.
-
Preset
memory
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your
favorite TV stations and store them
in
memory
for later recall.
1.
Touch BAND to switch the reception band.
2. Operate the channel display to select the
station to store to.
3. Touch and hold MODE for 1 second or
longer.
The preset memory list
is
displayed.
4. Touch and hold the preset
No.
to store for 2
seconds or longer.
You
will hear a long beep, and the station is
stored in memory.
If you hear a short beep, the station
is
not
stored to memory. Repeat the procedure
from step
1.
Recalling a
preset
station
This function allows the user to select a preset a
preset station.
•
To
cancel
tuning
1.
Touch RTN.
I
1.
50
DXZ945MP
To Next Page
Loading...
