13
English
FZ102E
Setting Regional (REG)
1. Select “REG”.
2. Turn the [
] rotary knob to select “ON”
or “OFF”.
Notes:
When the REG function is ON, the optimum re-
gional station can be received. When this function
is OFF, if the regional station area switches as you
drive, a regional station for that region is received.
The factory default setting is “OFF”.
This function is disabled when a national station
such as BBC R2 is being received.
The REG function ON/OFF setting is valid when
the AF function is ON.
Cancelling a PTY interrupt broadcast
Press the [TA] button during the PTY interrupt
broadcast.
Setting Programme Type (PTY)
1. Select “PTY”.
2. Turn the [
] rotary knob to select “ON”
or “OFF”.
Notes:
This function enables you to listen to a broadcast
of the selected programme type even if the unit is
on a function mode other than radio.
Some countries do not yet have PTY broadcast.
In the TA standby mode, a TP station has priority
over a PTY broadcast station.
The factory default setting is “OFF”.
PTY ITEM Contents
News News
Aairs Today’s events
Info Information
Sport Sports
Educate Education
Drama Drama
Culture Culture
Science Science
Varied Variety
Pop M Pop music
Rock M Rock music
Easy M Easy music
Light M Light music
Classics Classics
Other M Other music
Weather Weather
Finance Finance
Children For children
Social Social
Religion Religion
Phone In Phone in
Travel Trave l
Leisure Leisure
Jazz Jazz
Country Country
Nation M Nation music
Oldies Oldies
Folk M Folk music
Document Documentaries
Adjustment Mode
Selecting Program Type
1. Select “PTY SEL”.
2. Press the [
] button.
3. Turn the [
] rotary knob to select the
desired PTY.
* The PTY selection mode is cancelled automati-
cally 7 seconds after a PTY is selected.
PTY SEEK
During PTY item display, press the [ ]
/
[ ]
button to search for a PTY broadcast.
Note:
If no station with the selected PTY broadcast can
be received, the unit returns to the previous receiv-
ing station.
Setting clock type
1. Select “CLOCK”.
2. Turn the [
] rotary knob to select “RDS”
or “USER”.
Notes:
Set to display RDS or User adjustable clock.
The factory default setting is “USER”.
Setting clock format
1. Select "12/24 HR".
2. Turn the
[
]
rotary knob to select "12HR"
or "24HR"
Notes:
Set user clock format.
The factory default setting is “12HR”.
This setting is only available when User Clock is
selected.
Adjusting the clock
1. Select “CLK ADJ”.
2. Press the [
] button.
3. Press [
]
/
[ ] button to select the hour or
the minute.
4. Turn the [
] rotary knob to adjust the
time.
5. Press the [
] button to memory the new
setting value.
Notes:
This adjustment allows the user clock to be set by
user.
The factory default setting is “1:00”.
This setting is only available when User Clock is
selected.
Setting the method for title scroll
1. Select “SCROLL”.
2. Turn the [
] rotary knob to select “ON”
or “OFF”.
Notes:
Set the MP3/WMA title to scroll continuously or once.
The factory default setting is “ON”
Restoring to factory default setting
1. Select “RESET”.
2. Press the [
] button.
A conrmation message will be displayed.
3. Turn the [
] rotary knob to select “YES”.
4. Press the [
] button again to reset.
Notes:
All settings and preset memory channels will be
returned to initial stage. User will have to manually
perform those settings again.
Once reset, system will automatically turn o.
FZ102E_Owner_manual.indb 13 7/24/2012 9:55:21 AM
To Next Page
Loading...
