Clarion fz102e User Manual

14
English
FZ102E
9. TROUBLESHOOTING
Replace with a fuse of the same amperage.
If the fuse blows again, consult your nearest
service dealers.
Power does not turn on.
(
No sound is produced
)
Problem Cause Measure
Fuse is blown.
Incorrect wiring.
General
Consult your store of purchase.
Problem Cause Measure
Replace with a new USB memory
device.
MP3/WMA
(
USB Memory device
)
No sound heard.
Sound is cut or skipped.
Noise is generated or
noise is mixed with
sound.
USB memory device
cannot be detected.
USB memory device is
unable to plug into the
USB slot.
MP3/WMA les are
absent in a USB memory
device.
Files are not recognized
as an MP3/WMA le.
MP3/WMA les are not
encoded properly.
USB memory device
may be damaged.
The USB memory
device connector may be
inserted to the slot in the
wrong direction.
Transfer MP3/WMA les onto the USB
memory device properly.
Use correct encoded MP3/WMA les.
Use correct encoded MP3/WMA les.
Reinsert the USB memory device to try again.
Replace with a new USB memory device if
failed.
Reinsert the USB memory device with the
correct direction.
USB memory device
connector is in bad
condition.
The USB memory device
connector is damaged.
Compatibility issue Not all the USB memory device is guaranteed
to be supported.
USB card reader cannot
be detected.
USB card reader is
connected to main unit
rst before inserting
memory card to the card
reader.
Insert the memory card to USB card reader
rst before connecting to the main unit.
Error display is shown
when USB is plugged in.
Refer to the
corresponding Error
Display type.
10. ERROR DISPLAYS
FZ102E_Owner_manual.indb 14 7/24/2012 9:55:22 AM

Clarion fz102e Specifications

General

MP3 playback	Yes
CD-R playback	No
FM band range	87.5 - 108 MHz
LW band range	153 - 279 kHz
Product color	Black
Ready for iPod	-

Weight and Dimensions

Dimensions (WxDxH)	178 x 50 x 100 mm