To Next PageTo Next PageHow to fix Clarion fz102e when power does not turn on?
If your Clarion Car Receiver isn't powering on, there are a couple of things to check. First, a blown fuse could be the culprit. Replace it with a fuse of the same amperage. If it blows again, it may indicate a more serious problem. Also, incorrect wiring can prevent the unit from powering on. In this case, it is recommended to consult your store of purchase.
What to do if Clarion Car Receiver doesn't detect USB memory device?
If your Clarion Car Receiver isn't detecting the USB memory device, it could be due to a few reasons. The USB memory device itself may be damaged. Try reinserting it to see if that works. If not, try a new USB memory device. Also, there may be a compatibility issue.
What to do if Clarion Car Receiver doesn't detect USB card reader?
If your Clarion Car Receiver isn't detecting the USB card reader, make sure that the memory card is inserted into the USB card reader first, before connecting the card reader to the main unit.
General| MP3 playback | Yes |
|---|---|
| CD-R playback | No |
| FM band range | 87.5 - 108 MHz |
| LW band range | 153 - 279 kHz |
| Product color | Black |
| Ready for iPod | - |
Weight and Dimensions| Dimensions (WxDxH) | 178 x 50 x 100 mm |
|---|
Notes that the [TA] button is disabled for non-RDS models.
States that unauthorized modifications void the product warranty.
Instructions for powering the unit and selecting audio sources (Radio, USB, AUX).
Guide to adjusting volume, audio modes (Bass, Treble, Balance, Fader), and loudness effect.
Procedures for selecting bands, tuning stations, and storing/recalling presets.
Explanation of Radio Data System (RDS) functionalities like PS, AF, PTY, EON, TP.
Details on setting up and using the Traffic Announcement (TA) standby mode and interrupts.
Information on how the unit responds to and alerts for emergency broadcasts.
How to adjust volume for TA, ALARM, and PTY interruptions.
Important safety and operational advice for using USB memory devices.
Specifications for supported MP3/WMA file formats, sampling rates, and bit rates.
Guidelines for file systems, folder/file naming, and ID3/WMA tag support.
Explanation of how files are played based on their storage order on the USB device.
Steps for connecting the USB device and starting playback in USB mode.
How to select folders, tracks, use play/pause, and other playback functions.
Instructions for using Scan, Repeat, and Random play functions for tracks and folders.
How to switch and set the default display information for USB playback.
Guide for connecting and using external audio players via the 3.5mm AUX jack.
Configuration of Alternate Frequency, Regional, and Program Type settings.
How to select program types (PTY) and search for broadcasts by type.
Settings for clock format, time adjustment, and title scroll method.
Procedure to reset all settings and memory channels to their original factory state.
Solutions for issues like the unit not turning on or no sound being produced.
Troubleshooting steps for USB devices not detected, unable to plug in, or file recognition errors.
Resolving 'MNT ERR', 'USB ERR', and 'NO FILE' error messages related to USB devices.
Details on FM/AM tuner performance, USB file support, and audio parameters.
Information on audio output power, voltage, impedance, and unit dimensions.
