Clarion NX302A User Manual

3
English
NX302A
Operational Panel
[POWER/VOL] Knob
• Press to power on the system when ignition on.
• When power on, short press to mute the volume.
• Rotate the knob to increase or decrease the volume.
• Press and hold this key more than 1 second to turn off the system.
[ ALL ] ALL MENU Button
• Short press to show/exit shortcut menu.
• Long press to show/exit main source menu.
[ ] NAVI/AV Button
• Press to enter navigation mode;
• Press again to return current source.
[ MIC ] Hole
• Internal microphone
[RESET] Button
• Press to load original settings.
 Note:Whenthe[RESET]buttonispressed,frequenciesofradiostations,titles,etc.stored
inmemoryarecleared.
Names of Buttons
Selecting a Source
Turning the Power On
Start the engine. The power is supplied to
this unit.
Press [POWER/VOL] button on the panel to
turn on the unit.
Long press [ ALL ] button on the PANEL to show main source menu.
Touch [ - ] on the bottom of screen to show sources.
Change page by dragging left or right or touching other [ - ] buttons.
Touch the icons on the screen to enter corresponding work mode, such as Disc mode, Tuner
mode, Telephone mode, etc.
AUX Jack
[MIC]
RESET
[POWER/VOL]
[ ALL ] ALL MENU
[
] NAVI/AV
Micro SD card slot
Only navigation map
card is available and
don't remove it when
unit is power on.

Clarion NX302A Specifications

General

Brand	Clarion
Model	NX302A
Category	Car Video System
Language	English