What to do if my Clarion NX602 Car Video System resets itself when the engine is off?
If your Clarion Car Video System resets itself when the engine is off, it could be due to an incorrect connection between the ACC and the Battery. Check the wiring and correct it.
Why does my Clarion Car Video System reset when the engine is turned off?
If your Clarion Car Video System resets itself when the engine is off, there may be an incorrect connection between the ACC and the Battery. Check the wiring and correct it.
Why does my Clarion Car Video System keep resetting?
If your Clarion Car Video System keeps resetting, the issue might be due to an incorrect connection between ACC and the Battery. Check the wiring and correct it if necessary.
Why is there no audio output from my Clarion Car Video System?
If you're experiencing no or low audio output from your Clarion Car Video System, several factors could be responsible. It could be due to an improper audio output connection, so check the wiring. The volume might be set too low, so increase the volume level. The speakers could be damaged, requiring replacement. A heavily biased volume balance could be the culprit, so adjust the channel balance to the center position. Finally, the speaker wiring might be in contact with a metal part of the car; in this case, insulate all speaker wiring connections.
Why is the sound quality poor on my Clarion NX602?
Poor sound quality or distortion in your Clarion Car Video System could arise from several causes. Using a non-standard disc can cause this issue, so use a standard disc. If the speaker power rating doesn't match the unit, consider replacing the speakers. Incorrect wiring or a shorted speaker can also lead to poor sound, so check the wiring and correct it.
What to do if the remote control for my Clarion NX602 Car Video System doesn't work?
If the remote control for your Clarion Car Video System is not working, start by checking the battery. If the battery is depleted, change it. Also, ensure the battery is installed correctly.
Why is the display dark on my Clarion Car Video System?
A dark display on your Clarion Car Video System could be due to several reasons. First, check if the brightness control is set too low and adjust it properly. Also, the operating condition might not be ideal; try setting to an appropriate temperature (around 25°C) and check again. Also, the display is made dark at night to prevent the glare when the headlight of the vehicle is lit in the daytime.
What to do if my Clarion NX602 Car Video System cannot load a disc?
If your Clarion Car Video System cannot load a disc, first ensure that another disc is not already loaded; eject the current disc before loading a new one. Also, check for any foreign objects inside the unit and remove them.
What to do if my Clarion NX602 Car Video System cannot power on?
If your Clarion Car Video System isn't powering on, the issue might stem from a blown fuse. Check both the unit fuse and the car battery fuse, replacing either with a new fuse of the correct rating.
Why is the sound bad when I first turn on my Clarion NX602 Car Video System?
If the sound quality is poor when you first turn on your Clarion Car Video System, condensation may have formed on the internal lens if the car was parked in a humid place. Let it dry for about 1 hour with the power on.
General| Display Size | 6.2 inches |
|---|---|
| Resolution | 800 x 480 pixels |
| Touchscreen | Yes |
| Navigation | Yes |
| Bluetooth | Yes |
| USB Ports | 1 |
| DVD Player | Yes |
| Rear Camera Input | Yes |
| Audio Formats Supported | MP3, WMA, AAC |
| SD Card Slot | Yes |
| AUX Input | Yes |
| AM/FM Radio | Yes |
| Steering Wheel Control | Yes |
| Power Output | 50W x 4 |
| Video Formats Supported | MPEG-1, MPEG-2, DivX |
Understanding the device's touch screen buttons, icons, lists, and radio buttons.
How to input text and numbers using virtual keyboards and character switching.
Utilizing tap-and-hold, drag-and-drop gestures for enhanced functionality.
Viewing current position, route, and GPS signal status on the map.
Understanding Vehimarkers, cursors, and how map objects like streets are displayed.
Details on turn previews, lane information, junction views, and 3D object types.
Zooming, tilting, rotating the map, and switching between 2D and 3D perspectives.
Accessing frequently used functions and shortcuts via the Quick menu.
Viewing detailed location data and searching for nearby assistance from the map.
Accessing core navigation functions like Find, My Route, and More.
Methods for choosing a destination, including addresses and points of interest.
Step-by-step guides for entering addresses by country, street, or ZIP code.
Finding POIs like gas stations, restaurants, or accommodation by various search methods.
Displaying the complete planned route on the map for an overview.
Checking route details and accessing options like editing, bypassing, or cancelling.
Options to change the route, add waypoints, or set a new starting position.
Adding frequently visited locations to your Favorites list for quick access.
Marking locations like speed cameras for audible or visual alerts.
Running a simulated drive of your planned route to preview the journey.
Selecting destinations for off-road navigation, linking points with straight lines.
Understanding off-road navigation cues like compass bearing and distance.
Explanations of Smart Zoom, color themes, route calculation, and other key features.
Configuring program settings like sound, voice, route, map, and display options.
The legal terms and conditions for using the Clarion Mobile Map software.
Information regarding product and manual copyright, proprietary data, and usage rights.
To Next Page
