Clarion OHM102/OHM153 - Opening the Overhead Monitor

Opening the Overhead Monitor Opening the Overhead Monitor
Press the “OPEN” button to release the overhead monitor. Gently push down on the bottom of the
monitor until it reaches the desired position. The monitor will turn on automatically when it is fully
open.
Press the “OPEN” button to release the overhead monitor. Gently push down on the bottom of the
monitor until it reaches the desired position. The monitor will turn on automatically when it is fully
open.
Note: The vehicle’s ignition key must be “ON” or Accessory (ACC) position for the monitor to
have power.
Note: The vehicle’s ignition key must be “ON” or Accessory (ACC) position for the monitor to
have power.