OPERATING THE REMOTE CONTROL
1. Power button
Press the Power button to turn ON/OFF the monitor.
2. FM button
Press to turn ON/OFF the FM modulator (FM200 not included)
3. DIMMER button
Press to adjust the brightness of the screen.
4. MENU button
Press the MENU button to access the monitor adjustments.
FM MOD ON/OFF>Brightness>Contrast>Saturation>Hue>Sub Size>Sub Position> Default
Reset
(Down button)
MENU, then DOWN selects item to be adjusted.
DOWN: Selects Main AV source.
(Up button)
MENU, then UP selects item to be adjusted. UP:
Select Sub Screen AV source.
MAIN
MODE button
Press to change the screen format: Normal, Full, Zoom, and Wide.
INPUT button
Press to select AV source for Main Screen.
PIP button
Press to select PIP (Picture In Picture) or split screen operation.
SWAP button
Switches the PIP (Picture In Picture) with the Sub image.
To Next Page
Loading...
