2
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
INTRODUCTION
Thank you for purchasing this CLARKE 300mm Metal Lathe.
The compact rugged construction and screw cutting capabilities, makes the
CL300M ideal for model makers etc, both professional and DIY alike.
The machine is capable of turning up to a maximum diameter of 180mm and
an overall length of 300mm. It is further capable of producing short tapers and
Imperial threads, both left and right hand. Metric threads may also be cut with
the addition of a Metric Conversion Kit, available from your Clarke dealer (see
‘Accessories’ for details).
Before attempting to operate this machine, please read this instruction
manual thoroughly and follow all directions carefully. By doing so you will
ensure the safety of both yourself and others around you, and at the same
time you should look forward to long and trouble free service from your lathe.
IMPORTANT: This manual is intended to instruct the user on the operations
peculiar to the CL300M lathe ONLY. Although some reference is made and
advice given, regarding various metal turning techniques, it should not be
regarded as a general tutorial on the subject.
IMPORTANT: It is assumed that the user has some knowledge of machinery
of this type and is familiar with metal turning. If this is not the case, we
strongly advise that he/she enrol in a course at a local education centre
where possible, or seek advice from a qualified person.
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of
12 months from the date of purchase. Please keep your receipt as proof of
purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
To Next Page
Loading...
Need help?
General
