7
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
7. Ensure the tool post is secure and the cutting tool is adjusted to the correct
height.
8. Ensure the workpiece is properly secured.
9. Make all adjustments with the power OFF.
10. ALWAYS cut at correct speed for the size and type of material being
worked. Refer to a suitable turning manual for cutting speeds).
11. NEVER leave the lathe unattended whilst it is running.
12. When you have finished with machine always remove and store the
cutting tools.
13. When using a coolant in conjunction with the tray, on no account must
suds be allowed to enter the electrical system.
SAFETY SYMBOLS
The following safety symbols may be found on the machine.
Wear eye protection
Read instruction manual before use
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All
unwanted accessories and packaging should be sorted and taken to a
recycling centre for disposal in a manner which is compatible with the
environment.
ENVIRONMENTAL RECYCLING POLICY
Through purchase of this product, the customer is taking on the
obligation to deal with the WEEE in accordance with the WEEE
regulations in relation to the treatment, recycling & recovery and
environmentally sound disposal of the WEEE.
In effect, this means that this product must not be disposed of with general
household waste but according to the laws governing Waste Electrical and
Electronic Equipment (WEEE) at a recognised disposal facility.
To Next Page
Loading...
Need help?
General
