22
2. MIG 100E
1. MIG PRO-90
Two, 2-pole switches are marked
1- 2 and MAX - MIN respectively,
Set these switches according to
the charts on pages 27-29.
3. MIG 150TE
Three, 2-pole switches are used,
marked A - 1, 1 - 2 and MAX - MIN.
Set these switches according to
the charts on pages 27-29.
This model is provided with a single
two position switch marked MAX -
MIN, and a 3-position rotary switch.
Set these switches according to
the charts on pages 27-29.
To Next Page
Loading...
