12
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
USING YOUR GENERATOR
STARTING THE ENGINE
1. Remove all connections from the
AC sockets.
2. Set the fuel valve to the ON
positio
n as shown.
3.
4.
Move the choke lever to the
‘Choke’ position.
5. Insert the key into the ignition.
6. Turn and hold the key in the START
positio
n.
7. Once the engine starts to run turn
the key back to the RUN position.
8.
Once the engine has warmed up,
set the choke lever to the Run
positio
n.
To Next Page
Loading...
Need help?
General
