12
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
USING YOUR GENERATOR
STARTING THE ENGINE
1. Remove all connections from the AC sockets.
2.
Hold the fuel tank cap so that it
will not move, and turn the air
vent knob to the ON position.
3. Turn fuel valve to the ON position
(pointing downwards).
4.
Set the engine switch to ‘ON’.
5. Set the choke to the required
position.
• If the engine is cold, move the
choke to the left.
• If the generator is warm, move
the choke to the right.
To Next Page
Loading...
Need help?
General
