EasyManuals Logo

Clarke Power IG2200 User Manual

Clarke Power IG2200
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
CHECKING THE AIR FILTER
1. Remove the left side
maintenance panel.
2.
Remove the three air filter cover
screws shown on the right.
3. Slide out the air filter cover.
4. Remove the air filter element.
5. If the air filter is damaged contact
Clarke spare pa
rts department for
a replacement.
If the filter is dirty, wash it in a
solution of
warm water and
mild detergent and rinse
thoroughly. Leave the filter to
dry completely, once it is dry
immerse the filter in clean engine oil and sqeeze the filter to remove
excess oil.
6. Replace the filter into its original position and rep
lace and secure the air
filter cover then Replace the left side maintenance panel.
WARNING: DO NOT USE FLAMMABLE SOLVENTS OR PETROL TO CLEAN THE
AIR FILTER.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarke Power IG2200 and is the answer not in the manual?

Clarke Power IG2200 Specifications

General IconGeneral
BrandClarke
ModelPower IG2200
CategoryInverter
LanguageEnglish

Related product manuals