EasyManuals Logo

Clarke Power IG2200 User Manual

Clarke Power IG2200
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
UNPACKING AND ASSEMBLY
Unpack your Generator and check the following items are present. Should
there be any missing or damaged during transit contact your Clarke dealer
immediately.
1 x Inverter Generator
1 x Spark Plug Box Spanner
1 x Screwdriver/Tommy Bar
1 x Container with Spout for Oil Filling
1 x Operating & Instruction Manual
1 x 12V Battery Connector Lead
1 x Oil Drain Tube
BEFORE USING THE GENERATOR
IMPORTANT: Generators should ALWAYS be earthed. Make sure you ground
(earth) the generator.
Bef
ore using your generator check that:
The generator is in good condition and free from any damage.
The generator is clean and free from fuel or oil spillage.
The generator is correctly located for use (See page 4).
There is no leakage.
NOTE: To avoid accidental spillage of fuel, always use a funnel to fill the
fuel tank. If fuel is spilled it must be removed from the unit before
attempting to start the engine.
EARTH POINT
Always connect the generator to an
earth point. The earth terminal is
shown on the right.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarke Power IG2200 and is the answer not in the manual?

Clarke Power IG2200 Specifications

General IconGeneral
BrandClarke
ModelPower IG2200
CategoryInverter
LanguageEnglish

Related product manuals