EasyManuals Logo

Clarke Power IG2200 User Manual

Clarke Power IG2200
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
21
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
6. Check the spark plug gap (a) with
a feeler guage, it should be
between 0.6 and 0.7 mm.
Adjust if necessary.
7. Check the overall condition of the
spark plug an
d replace if
damaged.
NOTE: Spark plugs are available
from Clarke Spare Parts
department 020 8988 7400.
8. Reinstall the spark plug and replace the spark plug cap.
FUEL TANK FILTER
Just inside the fuel tank is a fuel filter, check this filter periodically and remove
any contaminants which may have accumulated.
1.
Fuel filler cap
Remove the fuel tank cap
2. Lift out the filter inside.
3.
Fuel filter
Clean the filter with solvent. If
damaged, replace.
4. Relace the filter and fuel tank
cap.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarke Power IG2200 and is the answer not in the manual?

Clarke Power IG2200 Specifications

General IconGeneral
BrandClarke
ModelPower IG2200
CategoryInverter
LanguageEnglish

Related product manuals