EasyManuals Logo

Clarke Power IG2200 User Manual

Clarke Power IG2200
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
19
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
AIR FILTER (EVERY 50 HOURS OF USE)
1. Remove the maintenance panel
shown on the right.
2.
Remove the three air filter cover
screws .
3. Pull out the air filter cover.
4. Remove the air filter element.
5. If the air filter is damaged contact
Clarke spare pa
rts department for
a replacement.
If the filter is dirty, wash it in a
solution of warm water and
mild detergent and then rinse
thoroughly.
Leave the filter to dry completely, once it is dry immerse the filter in
clean engine oil and sqeeze the filter to remove excess oil.
6. Replace the filter into its original position and replace and
secure the air
filter cover.
WARNING: DO NOT USE FLAMMABLE SOLVENTS OR PETROL TO CLEAN THE
AIR FILTER.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarke Power IG2200 and is the answer not in the manual?

Clarke Power IG2200 Specifications

General IconGeneral
BrandClarke
ModelPower IG2200
CategoryInverter
LanguageEnglish

Related product manuals