18
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
MAINTENANCE
ENGINE OIL (EVERY 20 HOURS OF USE)
1. Remove the maintenance panel
shown on the right.
2.
Turn the oil filler cap anti-
clockwise and remove from the oil
tank.
3.
Screw the oil drain tube into the oil
tank as shown.
4. Tilt the generator to allow the oil
to drain out of the oil
reservoir into
a suitable container.
NOTE: You may need assistance
with this step as the
generator is heavy.
5.
Fill the oil reservoir with fresh oil.
• Do not fill above the max level
mark (0.45 litre
s)
• We recommend the use of
SAE30 oil in this generator.
6. Replace the oil filler cap and
m
ainte
nance panel.
CAUTION: PROLONGED EXPOSURE TO USED ENGINE OIL IS DANGEROUS,
ALWAYS WASH YOUR HANDS THOROUGHLY AFTER HANDLING USED
ENGINE OIL.
To Next Page
Loading...
Need help?
General
