EasyManuals Logo

Clarke TFC 400 User Manual

Clarke TFC 400
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
MAINTENANCE SCHEDULE
ITEM DAILY WEEKLY QUARTERLY YEARLY
Flush chemical lines
Check/clean vac inlet lter
Clean solution lter
Check vacuum motor airways
Check pump for leaks
Check vacuum motor brushes *
x
x
x
x
x
* Have Clarke check the carbon brushes once a year or after about 500 hours of operation.
x
2-stage, 8 amp
97”
100 CFM
Rotationally molded polyethylene
20 gallon
13 gallon
400 psi
25 feet
25 feet
38.5 inches
21.25 inches
34 inches
92 lbs
MAINTENANCE
1) Use only approved chemicals at the recommended mix ratios. All chemicals
should be added through the feed system and NOT added directly to the water in
the solution tank to prevent possible damage to the pump, seals, or other
components.
2) For optimum performance, ush the Chemical Feed lines after every job by
replacing the chemical containers with containers of clear water and spraying
through the gun until the uid stream is clear. See the Maintenance Schedule,
below.
3) The pump seals and/or valves in the high pressure pumps may need to be
replaced after about 1000 hours of use, if the pump begins to loose
performance or to leak. The pressure regulator valve may need to be when a drop
in the spraying pressure at the tool is apparent.
4) If the 4”, clear lid is removed from the top of the base (solution tank), you will
need to apply a silicone sealant to the threads when you reinstall the lid to seal for
vacuum leaks.
TECHNICAL SPECIFICATIONS
Vacuum motor:
Water lift:
Air ow:
Tank constructions:
Solution tank capacity:
Recovery tank: capacity:
Application ow:
Vac & Solution hose length:
Power cord:
Height:
Width:
Length:
Machine weight:

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarke TFC 400 and is the answer not in the manual?

Clarke TFC 400 Specifications

General IconGeneral
BrandClarke
ModelTFC 400
CategoryFloor Machine
LanguageEnglish

Related product manuals