EasyManuals Logo

Clarke TIGER1700 User Manual

Clarke TIGER1700
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
UNPACKING AND ASSEMBLY
Unpack your pressure washer and check to ensure the following items are
present.
Contact your Clarke dealer immediately if any parts are missing or damaged.
CONNECT WATER SOURCE
Always follow the regulations of you local water supplier. The pressure washer
must never be connected to the drinking water supply without using a system
separator (also known as a backflow preventer) available from most
hardware stores.
NOTE: Water that has flowed through a system separator is considered non-
drinkable.
1. Connect a water supply hose (not
supplied) to the water inlet.
NOTE: Use a good quality fibre-
reinforced water hose with a
standard coupling.
1 x Petrol Pressure Washer 1 x Hose
1 x Gun Assembly 1 x Tap Adaptor
1 x Hose bracket 1 x Lance Assembly
1 x Nozzle Cleaning Pin 1 x Spark Plug Box Spanner
1 x Tommy Bar

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarke TIGER1700 and is the answer not in the manual?

Clarke TIGER1700 Specifications

General IconGeneral
BrandClarke
ModelTIGER1700
CategoryPressure Washer
LanguageEnglish

Related product manuals