CleanSpace EX - Page 15

CleanSpace Respirators USER INSTRUCTIONS
15
English
Switch the Power Unit to
Standby Mode. Briefly press
the Power Button once. The
Battery Indicator Light(s)
should illuminate.
Place the Power Unit behind
your neck with the mask
attached on the left-hand
side.
Ensure the head harness is
above the mask and not
tangled.
Connect the right-hand Mask
AirClip to the right-hand
Power Unit AirClip.
Locate the hook on the end of
the harness rear strap. Pull
the rear strap back over your
head.
Connect the hook to the loop
located on the filter cover of
the Power Unit.
The rear strap supports the
weight of the Power Unit.