User manual / Bedienungsanleitung
Made in Germany Page / Seite 17
6. Special instructions
6.1 Maintenance
If you don`t use your
Universal
tonearm for a while (eg. two weeks or more), we recommend to
raise and lower the arm‘s cueing lever/arm lifter a few times over that time period to avoid it sticking
in the raised position.
Before using it for the rst time or after a long period of inactivity, the lift should be operated
approximately 4-5 times so that the grease in the tonarm lift can be loosened and the lift bar is able
to evenly lower again.
6.2 Transportation
Should further transportation of the
Universal
tonearm be necessary, please always use the original
packing material. Otherwise serious damage could occur.
When repackaging the tonearm, please follow in reverse the steps indicated in this
manual for installation and setup.
6.3 Service
If any servicing or repair of a Clearaudio product is necessary, please rst contact your dealer or
distributor. Alternatively contact Clearaudio directly and we will inform you about your nearest
service location.
PLEASE RETAIN ALL ORIGINAL PACKAGING.
You will need it if this product has to be transported and/or shipped.
Any further questions you may have about this product should be directed to your local dealer.
To Next Page
Loading...
