Clevo P177SM - Removing the Hard Disk from the Secondary HDD Bay

Disassembly
2 - 12 Removing the Hard Disk from the Secondary HDD Bay
2.Disassembly
Removing the Hard Disk from the Secondary HDD Bay
Note that the secondary hard disk (if installed) is located under the optical device bay (CD/DVD).
1. Turn off the computer, and turn it over, remove the battery (page 2 - 5) and optical device (page 2 - 10).
2. Remove screws - from the secondary HDD assembly (Figure 8a
).
3. Slide the secondary HDD assembly in the direction of the arrow (it will not move fully out of the bay Figure 8a
).
4. Lift the secondary HDD assembly up and out of the bay (in the reverse direction of the arrow
Figure 8c).

5. Hard Disk Assembly
• 3 Screws
Figure 8
Secondary HDD
Assembly Removal
a. Remove the screws from
the secondary HDD as-
sembly.
b. Slide the secondary HDD
assembly in the direction
of the arrow.
c. Lift the secondary HDD
assembly up and out of
the bay.
1
3
4
6
5
4
a. c.
b.
3
1
2
4
5
5