Clevo W230ST - Removing the WLAN Module

Disassembly
Removing the WLAN Module 2 - 15
2.Disassembly
Removing the WLAN Module
1. Turn off the computer, turn it over and remove the battery (page 2 - 5), and component bay cover (page 2 - 6).
2. The WLAN module will be visible at point on the mainboard (Figure 11a).
3. Carefully remove the screw
and disconnect cables & (Figure 11b).
4. The WLAN module (Figure 11c) will pop-up, and you can remove it from the computer (Figure 11d).
1
2
3
4
5
1
a.
b.
5
3
5
c.
d.
4
2
Figure 11
WLAN Module
Removal
a. Locate the WLAN
module.
b. Remove the screw and
disconnect the cables.
c. The module will pop-
up.
d. Remove the WLAN
module.

5. WLAN Module
•1 Screw