Clifford Concept 650 - Page 3

ECE REGULATION NO: 10.03
EAK216611
An executive agency of the Department for Transport
October Version 3
3
Appendix to Type Approval Communication Certificate No: 10R-035487
concerning the type approval of an electrical/electronic sub-assembly under Regulation No: 10
1. Additional information
1.1. Electrical system rated voltage: 12V. pos
/neg ground
(1)
1.2 This ESA can be used on any vehicle type with the following restrictions: 12V. pos
/neg ground
(1)
1.2.1 Installation conditions, if any: Supplied with the product
1.3 This ESA can be used only on the following vehicle types: Not applicable
1.3.1 Installation conditions, if any: Not applicable
1.4 The specific test method(s) used and the frequency ranges covered to determine immunity were:
(Please specify precise method used from Annex 9): 20 to 2000MHx at 30 V/m free field.
1.5 Approved/accredited laboratory (for the purpose of this Regulation) responsible for carrying out
the test: SGS UK Limited
2. Remarks: None.
(1)
Delete where inapplicable
U
K
A
p
p
r
o
v
a
l
A
u
t
h
o
r
i
t
y
24-Mar-10