Clifford Concept 650 - Page 4

REG 10.3
ANNEX 2B.
INFORMATION DOCUMENT
FOR TYPE-APPROVAL OF AN ELECTRIC/ELECTRONIC SUB-ASSEMBLY
WITH RESPECT TO ELECTRONMAGNETIC COMPATIBILITY
1. Make (trade name of manufacturer):Directed Ele
ctronics
2. Type: 350HV (426V), 426P Python 460HP 1 way, Matrix +1 p/n 310
5X, Matrix 1X p/n
3305X, 350 p
lus p/n 3105V, Responder 350 p/n 3305V, 3305P Python 460 two way &
3105P Python 460 max 1 way.
3. Means of Identification of type, if marke
d
on the component/separate technical unit
:
Sticker on base of unit
3.1. Location of marking: On top of unit
4. Name and address of manufacturer:
Directed Electronics
1 Viper Way, Vista, CA 92081, USA.
Name and address of authorized representative, if any:
Carl Huntington
120 Riverview Rd, Ewell, Epsom, Surrey, KT19 0JQ
5. In case of components and separate technical units, location and method of affixing
of the approv
al mark: Printed on Sticker
on top of unit
6. Address(es) of assembly plant(s):
Nutek
No.167, Lane 235, BauChiau Road, ShinDian City, Taipei County 231, Taiwan
7. This ESA shall be approved as a Component:
8. Any restrictions of use and conditions fo
r fitting: See instru
ctions with product
9. Electrical system rated voltage: V Pos/Neg Ground.12V
Appendix 1.
Description of the ESA chosen to represent the type (elec
t
ronic block diagram and list
of main components constituting the ESA (e.g. make and type of microprocessor,
crystal etc.).
Appendix 2.
Relevant test report(s) supplied by the manufa
c
turer from a test laboratory accredited
to ISO 17025 and recognized by the Approval Authority for the purpose of drawing up
the type approval certificate.
U
K
A
p
p
r
o
v
a
l
A
u
t
h
o
r
i
t
y
24-Mar-10