Climecon CLEANMASTER Series - Page 12

clime con.fi
12
Lämmittäjänkatu 4 A, 00880 Helsinki, FINLAND · Tel. +358 (0)20 198 6600
© Climecon
3. Number of separators
The measurement of air quantity is based on meas-
uring the chamber pressure. To achieve the correct



1–12 separators.

to the logic. If there are ‘blinds’ in the hood, they are
not included in the number of separators. For exam-
ple, the maximum number of separators in a hood

4. Approve the selections by clicking


-

in the OFF position. When the UV lamp is on, the lamp

For other settings than the hood controller’s basic settings, please read through the separate user manual,
climecon.fi/clm.
The Climecon CleanMaster system can also be connected to the external ModBus control device.

map is available through Climecon Oy’s customer service.