Climecon CLEANMASTER Series - Installing the UV Lamp

To Next Page

To Previous Page

clime con.fi

Lämmittäjänkatu 4 A, 00880 Helsinki, FINLAND · Tel. +358 (0)20 198 6600

1. Attach the UV lamp carefully to the fastenings in the hood’s grease chamber.

NOTE! Centre the lamp’s blue plastic parts to the fastenings. Tighten the fasten-



2.

hood’s ceiling. Rotate the connector’s locking ring.

NOTE! Attach the instruction labels (included in the delivery) for changing the UV

lamp and maintaining the hood in a visible place near the CCM control unit.

3.

and roll up any extra cords so that they do not lie in the grease.

NOTE! Do not attach the cords directly to the lamp!

13. Installing the UV lamp

Other manuals for Climecon CLEANMASTER Series