Climecon CLEANMASTER Series - Climecon Cleanmaster - Updating an External Controller

clime con.fi
24
Lämmittäjänkatu 4 A, 00880 Helsinki, FINLAND · Tel. +358 (0)20 198 6600
© Climecon
17. Climecon CleanMaster® – updating an external controller
IMPORTANT!
updated. See 
1. Detach the external controller’s cord.
2. Press the ‘Home’ + ‘ESC’ 
3. Reattach the external controller’s cord.
Note! 
4. 

5. Release the buttons.
6. Wait until the screen’s start sequence is ready.
During the sequence, the text ‘Starting’ is displayed on

7. The device has been updated and is ready for use.