climecon.fi
2
Lämmittäjänkatu 4 A, 00880 Helsinki, FINLAND · Tel. +358 (0)20 198 6600
© Climecon
CONTRACTOR!
IMPORTANT!
READ THE INSTALLATION MANUAL CAREFULLY
Check at least the following sections to ensure an acceptable installation.
1. When you first start the device, determine its purpose of use and the
number of separators. See page 10.
2. CHECK THAT THE SLIDESAFE SWITCH IS WORKING.
When the switch is opened (downward position),
the UV system has to shut down.
3. CHECK THAT THE SEPARATORS
HAVE BEEN INSTALLED CORRECTLY!
The upper part of the separator has
a ‘tongue’ which should be placed
in the groove in the upper part of
the grease chamber. The UV separator
is formed of two parts.
4. CHECK THAT THE INSTRUCTIONAL LABELS ENCLOSED TO
THE DELIVERY are installed in the immediate vicinity of the hoods.
5. USERS MUST BE TRAINED TO OPERATE THE DEVICE and this
training should also be written down for the client.
6. MAKE SURE THAT THE COMMISSINING RECORD HAS BEEN
FILLED IN CORRECTLY and that all the necessary tests have been per-
formed and recorded!
You can also order the commissioning, installation, (excluding hauling and
HVAC contract work) training and maintenance services directly from Climecon.
Lämmittäjänkatu 4 A
00880 HELSINKI
Puh. +358 20 198 6600
climecon.fi
Please make sure that the fold
and the three holes are
facing upwards!
To Next Page
Loading...
Need help?
General
