CLIVET CKN-XHE2i 7.1 User Manual

Dimensional drawings
Size 10.1 - Version CAK/CBK/CCK
Weight distribution of full re-circulation (CAK) / Recirculation and renewal air (CBK) conguration
Size 10.1
W1 Supporting Point kg 132
W2 Supporting Point kg 107
W3 Supporting Point kg 131
W4 Supporting Point kg 126
Shipping weight kg 532
Weight distribution of full re-circulation, renewal air and exhaust (CCK) conguration
Size 10.1
W1 Supporting Point kg 138
W2 Supporting Point kg 113
W3 Supporting Point kg 137
W4 Supporting Point kg 132
Shipping weight kg 556
The presence of optional accessories may result in a substantial variation of the weights shown in the table.
1. Compressor compartment
2. Electrical panel
3. Power input
4. Humidier connections
5. Condensate drain
6. H2O heating coil outpu Φ 1”
7. H2O heating coil input Φ 1”
8. Re-heating coil (optional)
9. Internal exchanger
10. External exchanger
11. H2O heating coil (optional) or heating elements (optional)
12. Electrostatic lters or F7 (optional)
13. G4 air lters (standard)
14. Electric fan (supply-return)
15. Exhaust electric fan (version CCK only)
16. Lifting brackets (removable)
17. Over pressure damper exhaust (version CCK only)
18. Access for inspection coil, lters, hesting elements
19. Access for inspection of the bleed valve (hot water coil)
20. Duct section removable for maintenance provided by the customer
21. Fresh air intake cap (only version CBK-CCK)
(R) Air return
(M) Air supply
(AE) Fresh air intake
(ES) Air exhaust (only version CCK)
(H1) Wall with same height as unit on a maximun of three side
(**) Minimun suggested clearance
(*) Vibration mounts position
DAA6K0002_10.1_0_REV00
Data/Date 06/11/2017
M06K10A18-00 CKN-XHE2i 7.1-14.2
6

CLIVET CKN-XHE2i 7.1 Specifications

General

Brand	CLIVET
Model	CKN-XHE2i 7.1
Category	Heat Pump
Language	English