6 - CONTROL
6.5 Shut–down for long periodos
When switching off for long periods or holidays, proceed as
follows:
• Deactivate the appliance
• Set the master switch to OFF
The anti-freeze function is not active.
There are two dip-switches on the electronic control panel for
setting the functions of the appliance as required.
Use cursor A to modify the night function logic:
• In the ON position the ventilation is inhibited thus letting
the machine heat the room through natural radiation or
convection as happens with traditional radiators;
• in the OFF position the fan functions normally.
Set cursor B to ON (in cooling only) to enable the continual
ventilation at the minimum speed, even after the set point has
been reached (in the neutral band) to ensure a more regular
functioning of the temperature probe.
Passing to heating will cancel this condition; set the cursor set
to OFF to disable this function.
6.4 Setting auxiliary functions
To Next Page
Loading...
