CME VX 5 - Nuendo 3.2; Cubase SX 3.1

25
Nuendo 3.2 / Cubase SX 3.1
z Connect the VX to the computer and turn on the power.
z Press the U-CTRL button on VX once to set U-CTRL to U-CTRL A.
z Open Nuendo 3.2 / Cubase SX 3.1.
z Click【Device Setup…】under the【Devices】menu.
z On the【Device Setup】window，Click on【+】, then click on【Mackie Control】.