33
Set the value range: The first value is the data sent when button pressed; the
second value is the data sent when button released. Off means sending no
data.
S e q - R T Z 6 - 4
P o r t : 1 C H : 0 1 ← →
Set the MIDI port and channel.
If the type on page 6-1 is set to “Note”:
S e q - R T Z 6 - 1
T y p e : N o t e ← →
The next page will be:
S e q - R T Z 6 - 2
0 6 0 - C 4 ← →
Set the note #.
S e q - R T Z 6 - 3
1 2 7 / 0 0 0 ← →
Set the trigger data: The first value is the trigger info. when button pressed; the
second value is the trigger info. when button released, and the trigger value can
be set to OFF.
S e q - R T Z 6 - 4
P o r t : 1 C H : 0 0 ← →
Set the MIDI port and channel.
8.4.2.7 Assigning Potentiometer Knobs
z Potentiometer knob:
K n o b - 1 7 - 1
0 5 2 - U n d e f i n e d ← →
Select one of the 8 potentiometer knobs.
Set the CC #.
K n o b - 1 7 - 2
0 0 0 - 1 2 7 ← →
Set the value range.
8.4.2.8 Assigning Pads
z Pad:
P a d - 0 1 8 - 1
T y p e : N o t e ← →
To Next Page
Loading...
Need help?
General
