38
stops.
z When the ZONE function is on, the port/channels settings of F1-F8 will be
substituted by the ZONE settings.
z ZONE on/off settings:
Z 1 Z 2 Z 3 Z 4 1
O N O N O N O N →
It is the on/off settings of ZONE 1～4.
z Setting the port, channel and keyboard range of ZONE 1～4:
Z 1 P 1 C H 0 1 2
M 0 0 0 L 0 0 0 P C 0 0 1 ← →
Z: ZONE#. By default, ZONE 1 = Port1/CH1, ZONE 2 = Port2/CH, ZONE3 =
Port3/CH1, ZONE 4 = Port4/CH1.
P: MIDI OUT port, 1-4.
CH: MIDI channel, 01-16.
M: MSB#. Cc#000, value range is 000-127.
L: LSB#. Cc#032, value range is 000-127.
PC: program change #.
z Setting the keyboard range and velocity range of ZONE:
Z 1 R a n : 0 0 0 - 1 2 7 3
V e l : 000 - 127 ← →
Ran: keyboard Range of ZONE1～ZONE4. There is a shortcut to set the Key#,
that is, when the value flashes, you can play a key in the keyboard to specify the
key #.
Vel: Velocity range of ZONE1～ZONE4.
z Octave and transpose of ZONE:
Z 1 O c t a v e : 0 0 4
T r a n s p o s e : 0 0 ←
You can set the octave and transpose value for each of the 4 zones respectively.
When the ZONE function is on, the octave and transpose buttons work on all
zones.
The zone octave range is -04～00～+04.
The zone transpose range is -12～00～+12 semi-notes.
To Next Page
Loading...
