68
In the tyle SEQ mode:
Sending data:
1. Any messages sent by keyboard/controller parts and messages from the MIDI IN
ports will be routed to USB IN A in the computer sequencing software.
2. Any messages sent to MIDI OUT port 1 will also be duplicated to the expansion
board and under the local control. (The local control is on by default)
3. Messages sent by any keyboard/controller parts, and messages from MIDI file
playing, will be routed to MIDI OUT Port 1.
4. Messages from the MIDI IN port will be routed along with the related keyboard parts
messages.
Receiving data:
5. Messages to USB OUT A in the computer software will be routed to MIDI OUT 4.
6. Messages to USB OUT C in the computer software will be routed to the expansion
board.
Messages to USB OUT B and/or from USB IN B will be ignored.
In the Style SEQ mode, messages from any parts will be routed to MIDI OUT 1 and
USB IN 1 regardless of their original port settings or F1-F8 settings.
To Next Page
Loading...
Need help?
General
