Maintenance
169
Owners handbook 2022
• Octagon Shock Absorbers.
In addition the backplate has a ‘gold’
coloured, zinc passivated finish.
All Euro-Axles can be positively identified
by the axle date plate.
Important note
The toe-in and camber is factory set and
must not be altered.
Braking System adjustment must be
carried out by an Approved Dealer.
AL-KO breaking system
adjustment
This must only be undertaken by an
Approved Dealer.
Changing a wheel
(see section “Towing and Driving”)
Before fitting a new wheel, examine it for
distortion or other damage. Ensure that
all mating surfaces are clean and dry,
including bolt seats.
ALWAYS USE THE CORRECT BOLTS
TO SECURE THE WHEEL. THERE ARE
UNIQUE BOLTS FOR ALLOY WHEELS
AND UNDER NO CIRCUMSTANCES
SHOULD ANY OTHER BOLTS BE USED
WITH ALLOY WHEELS.
Alloy wheel bolts are stamped with 10.9
and may be used with steel wheels.
A corner steady brace is not to be used for
the next step.
- Fit the new wheel and refit the
wheel bolts.
To Next Page
Loading...
Need help?
General
