Preparing for the road
23
Owners handbook 2022
Display colour ATC
Condition
Diagnosis What to do Outcome Status
Green ATC active Everything OK
Green flashing ATC active Self test incomplete Drive forward to detect
movement to complete self
test and re check LED
Green
(Constant)
Ready for journey
Red ATC inactive Possible to continue
journey.
Remove 13 pin plug and wait 5
seconds. Reconnect plug
Green
Red
Ready for journey.
ATC faulty but can be driven.
Consult AL-KO. See AL-KO
handbook
for details
Red flashing ATC has
detected a
fault
Do not continue with ATC
connected
Remove 13 pin plug and wait 5
seconds. Reconnect the plug.
Green
Red (flashing)
Ready for journey.
ATC faulty and cannot be driven.
Remove push-rod as shown in
the AL-KO handbook. Consult
AL-KO. See AL-KO handbook
for details.
LED not
working
ATC has no
power.
LED faulty
Check push rod position
as detailed in the AL-KO
handbook continuing
journey.
Remove 13 pin plug and wait 5
seconds. Reconnect the plug.
Check for constant live - refer
to system requirements as
detailed in the
AL-KO handbook.
Green.
LED not
working.
Ready for journey.
If power OK, check push rod
position.
Red line visible - possible to
continue journey but consult
AL-KO. See AL-KO handbook
for details.
Prior to commencing any journey, ensure that the caravan lighting is fully operational and check the vehicle is loaded appropriately,
the nose weight and tyre pressure are correct and confirm that the caravan is coupled to the vehicle tow bar correctly.
To Next Page
Loading...
