Chapter 5: Configuration with web interface
98-169085-B Advanced settings 89
4. To add more phone numbers, click Add phone number again.
5. Click Save.
For information on how to send SMS commands, see Remote access with SMS on page 37.
Remote control of tracking
When you are using the tracking function of the EXPLORER 323, you can set up the terminal so
that the tracking server can access the EXPLORER 323 e.g. to start or stop tracking or to change
reporting intervals.
To allow the tracking server to control the tracking settings, do as follows:
1. Under Advanced, select Tracking settings.
2. Select Allow remote control of tracking.
3. Click Save.
The EXPLORER terminal will now accept commands from the specified tracking server, for
example to change reporting intervals or start/stop reporting.
To Next Page
Loading...
