GR712RC-QSG
November 2018, Version 1.0
3 www.cobham.com/gaisler
1. Introduction
1.1. Overview
This document is a quick start guide for the GR712RC Development Board.
The purpose of this document is to get users quickly started using the board.
For a complete description of the board please refer to the GR712RC Development Board User Manual.
The GR712RC system-on-chip is described in the GR712RC User Manual.
This quick start guide does not contain as many technical details and is instead how-to oriented. However, to make
the most of the guide the user should have glanced through the aforementioned documents and should ideally also
be familiar with the GRMON debug monitor.
1.2. References
Table 1.1. References
RD-1 GR712RC Development Board User Manual
RD-2 GR712RC User Manual [http://gaisler.com/doc/gr712rc-usermanual.pdf]
RD-3 GR712RC Data Sheet [http://www.gaisler.com/doc/gr712rc-datasheet.pdf]
RD-4 GRMON User's Manual [http://www.gaisler.com/doc/grmon3.pdf]
RD-5 RTEMS homepage [http://www.rtems.org]
RD-6 RTEMS Cross Compilation System (RCC) [http://www.gaisler.com/index.php/products/op-
erating-systems/rtems]
RD-7 RCC User's manual [http://gaisler.com/anonftp/rcc/doc]
RD-8 Cobham Gaisler RTEMS driver documentation [http://gaisler.com/anonftp/rcc/doc]
RD-9 GRTOOLS homepage [http://www.gaisler.com/index.php/downloads/grtools]
RD-10 Bare C Cross-Compilation System [http://www.gaisler.com/index.php/products/operat-
ing-systems/bcc]
RD-11 BCC User Manual [http://www.gaisler.com/doc/bcc2.pdf]
RD-12 MKPROM2 User Manual [http://gaisler.com/doc/mkprom.pdf]
The referenced documents can be downloaded from http://www.gaisler.com.