Chapter 2: Operation
14 Set up a telex call
2. Select A
RQ, Selective FEC or Broadcast FEC.
Select the frequency for the call
You can select the frequency for your call in one of the following ways:
• M
anual frequency: Allows you to type in the frequency in the Tx freq
and Rx freq fields (Rx is only relevant for ARQ calls).
When you select a coast station from the Coast stations list, the primary
frequencies are listed, and you can select the frequency to use.
• ITU i
ntership channel: Allows you to type in a channel number to
use for ship-to-ship communication.
• IT
U coast station channel: Allows you to type in a channel number
to use for communication with a coast station.
By un-checking the WRC-12 option, it is possible to select ITU
intership and coast station channels that are deprecated as of 1st
January 2017.
To Next Page
Loading...
